Five Useful Steps to Install Security Cameras

Are you planning to buy security cameras anytime soon? Ideally, they should top your priority list. This is because burglaries are becoming too common to ignore. Buying and installing surveillance cameras for home security Chicago will keep you safe and give you immense peace of mind.

When you decide to buy security cameras, you will be worried about how to install them. Here are the steps that will help you to install the cameras properly in your house.

home security Chicago

How to Install Security Cameras?

1. Choosing the perfect angle for installing the camera -

Surveillance cameras should be installed at a broad and high angle. It is best to install the camera at the corner where the wall and the ceiling meets. The camera should also be close to a power outlet. Make sure that the camera can monitor the entries and exits from the position where you are installing it. If your security camera is an outdoor one, it should be at least ten feet high from the ground. This will keep it safe from an intruder who might try to damage it.

2. Mounting the camera on the wall -

Many security cameras have a sticky pad, which helps to paste it on a wall. But, the best practice is to mount the cameras on the wall. Most cameras can be mounted in a similar process. You need to first place the mount on your preferred spot. Use a marker to highlight the places where the screws would go in. With the help of an electric drill, make holes for the screws. Mount the surveillance camera on the wall and then turn it to your preferred angle.

3. Attaching your camera to a source of power -

When you buy a camera, you get a travel adapter within the pack. The adapter can be easily plugged into sockets. The other smaller and round end of the adapter has to be plugged into the back of the camera. You must get in touch with the manufacturer, in case the travel adapter is broken or missing from the pack.

4. Joining your wired camera to a DVR -

This is the next step in installing surveillance cameras for home security Chicago. A specific connection is used to connect surveillance cameras. Strong and durable cables are convenient for use. Both sides of these cables are similar and you just have to plug them to the correct port. You have to secure the cable in its place by turning a small nut. While one end of this cable is plugged into your camera’s output, the other end is plugged into the DVR’s input.

5. Linking wireless cameras to your computer -

Wireless cameras have a software disc. You have to install the disc to view the footage.

These are some of the steps to install security cameras for home security Chicago. Once the cameras are installed, they will efficiently monitor your house. This will help you to stay relaxed regarding the security of your house.

Comments are closed.